Caterpillar 194-6469 Hydraulic Final Drive Motor
| Brand Name |
Caterpillar |
| Model Number |
194-6469 |
| Min.Order Quantity |
1 pcs |
| Price |
Negotiable |
Product Features
Caterpillar 194-6469 bearing Size Chart (mm/inches) |
|---|
| Bearing number | 708 CE/P4A |
| Size (mm) | 22x8x7 |
| Bore Diameter (mm) | 22 |
| Outer Diameter (mm) | 8 |
| Width (mm) | 7 |
| d | 8 mm |
| D | 22 mm |
| B | 7 mm |
| d1 | 12.1 mm |
| d2 | 11.5 mm |
| D1 | 17.9 mm |
| r1,2 - min. | 0.3 mm |
| r3,4 - min. | 0.15 mm |
| a | 5.6 mm |
| da - min. | 10 mm |
| db - min. | 10 mm |
| Da - max. | 20 mm |
| Db - max. | 20.6 mm |
| ra - max. | 0.3 mm |
| rb - max. | 0.15 mm |
| dn | 13.3 mm |
| Basic dynamic load rating - C | 2.3 kN |
| Basic static load rating - C0 | 0.8 kN |
| Fatigue load limit - Pu | 0.034 kN |
| Limiting speed for grease lubrication | 109000 r/min |
| Limiting speed for oil lubrication | 165000 mm/min |
| Ball - Dw | 3.969 mm |
| Ball - z | 8 |
| Gref | 0.17 cm3 |
| Calculation factor - f0 | 6.6 |
| Preload class A - GA | 15 N |
| Preload class B - GB | 35 N |
| Preload class C - GC | 75 N |
| Calculation factor - f | 1.02 |
| Calculation factor - f | 1 |
| Calculation factor - f2A | 1 |
| Calculation factor - f2B | 1.03 |
| Calculation factor - f2C | 1.05 |
| Calculation factor - fHC | 1 |
| Preload class A | 10 N/micron |
| Preload class B | 14 N/micron |
| Preload class C | 20 N/micron |
| Category | Bearings |
| Inventory | 0.0 |
| Manufacturer Name | SKF |
| Minimum Buy Quantity | N/A |
| Weight / Kilogram | 0 |
| Product Group | B00308 |
| d1 | 12.1 mm |
| d2 | 11.5 mm |
| D1 | 17.9 mm |
| r1,2 min. | 0.3 mm |
| r3,4 min. | 0.15 mm |
| da min. | 10 mm |
| db min. | 10 mm |
| Da max. | 20 mm |
| Db max. | 20.6 mm |
| ra max. | 0.3 mm |
| rb max. | 0.15 mm |
| dn | 13.3 mm |
| Basic dynamic load rating C | 2.34 kN |
| Basic static load rating C0 | 0.8 kN |
| Fatigue load limit Pu | 0.034 kN |
| Attainable speed for grease lubrication | 109000 r/min |
| Attainable speed for oil-air lubrication | 165000 r/min |
| Ball diameter Dw | 3.969 mm |
| Number of balls z | 8 |
| Reference grease quantity Gref | 0.17 cm³ |
| Preload class A GA | 15 N |
| Static axial stiffness, preload class A | 10 N/µm |
| Preload class B GB | 35 N |
| Static axial stiffness, preload class B | 14 N/µm |
| Preload class C GC | 75 N |
| Static axial stiffness, preload class C | 20 N/µm |
| Calculation factor f | 1.02 |
| Calculation factor f1 | 1 |
| Calculation factor f2A | 1 |
| Calculation factor f2B | 1.03 |
| Calculation factor f2C | 1.05 |
| Calculation factor fHC | 1 |
| Calculation factor f0 | 6.6 |
| Mass bearing | 0.012 kg |